Difference between revisions of "Using a LOR iDMX adapter to drive Lynx equipment."

Revision as of 21:21, 16 August 2009

If you are using a Light-O-Rama iDMX adapter to drive Lynx equipment, your XLR to RJ-45 adapter should look like this.

The image is from Light-O-Rama.

The following are the pinouts, assuming TIA-568B for the RJ45 end.

For the Lnyx Equipment
- XLR Pin 1 (GND) ----> N/C
- XLR Pin 2 (-ve) ----> RJ45 Pin 2 (Orange)
- XLR Pin 3 (+ve) ----> RJ45 Pin 1 (White/Orange)

Revision as of 21:12, 16 August 2009 (view source) Memphislights (Talk \| contribs) ← Older edit		Revision as of 21:21, 16 August 2009 (view source) Memphislights (Talk \| contribs) Newer edit →
Line 2:		Line 2:

	[[Image:LOR_iDMX.jpg]]		[[Image:LOR_iDMX.jpg]]
		+
	The image is from Light-O-Rama.		The image is from Light-O-Rama.