Difference between revisions of "Troubleshooting"
From DiyLightAnimation
| Line 1: | Line 1: | ||
| − | ==Hardware== | + | ==Controller Hardware== |
| + | Check and recheck for correct: | ||
| + | ::*Solder joints for good solder flow | ||
| + | ::*Component orientation - matching the silkscreen image on the board - not necessarily the orientation of chip sockets or other carrier devices (they could have been installed backwards). | ||
| + | ::*Resistor values | ||
| + | ::*Capacitor polarities | ||
| + | ::*Part numbers | ||
| + | |||
| + | Always feel free to post help requests with sharp, close-up pictures of your hardware that you are having problems with in the forums to get help from others. | ||
| + | |||
| + | |||
*[[Troubleshooting Lynx Express|Lynx Express]] | *[[Troubleshooting Lynx Express|Lynx Express]] | ||
*[[Troubleshooting Lynx Freestyle|Lynx Freestyle]] | *[[Troubleshooting Lynx Freestyle|Lynx Freestyle]] | ||
| Line 7: | Line 17: | ||
*[[Troubleshooting Lynx Dongle|Lynx Dongle]] | *[[Troubleshooting Lynx Dongle|Lynx Dongle]] | ||
*[[Troubleshooting Lynx Splitter|Lynx Splitter]] | *[[Troubleshooting Lynx Splitter|Lynx Splitter]] | ||
| + | |||
| + | |||
==Software== | ==Software== | ||
Revision as of 12:48, 29 August 2009
Controller Hardware
Check and recheck for correct:
- Solder joints for good solder flow
- Component orientation - matching the silkscreen image on the board - not necessarily the orientation of chip sockets or other carrier devices (they could have been installed backwards).
- Resistor values
- Capacitor polarities
- Part numbers
Always feel free to post help requests with sharp, close-up pictures of your hardware that you are having problems with in the forums to get help from others.
