Light-O-Rama Controllers
From DiyLightAnimation
Revision as of 16:14, 17 August 2009 by 204.181.6.162 (Talk)
Contents
Helpful links to Use LOR equipment with DLA
- LOR to Lynx Dongle Connections
- DMX-DOC.pdf; Light-O-Rama document showing firmware versions required for DMX operation
- Light-O-Rama Support; Light-O-Rama downloads
- LOR controllers need to be updated to firmware v4.20 or higher to work in a DMX environment.
- The only supported way to update the firmware in the LOR controllers is to use the LOR utility. This requires a valid licensed copy of of the Light-O-Rama sequencing software.
- ? Question: Is the LOR controller auto terminated?
- Light-O-Rama v2 to Vixen sequence converter.; written by aERonAUtical96 (Rob)
- Light-O-Rama iDMX Connections
- General Information on Dongle Connections
Lynx Dongle to LOR 568b and possible D-light cable pinout
| Dongle | LOR |
| WH/OR (1) | Blue (4) |
| Orange (2) | WH/Blue (5) |
thanks to Joneslights for the information.
Sample cable to connect dongle
This is a simple dongle to convert and crossover the blue and orange cable pairs.
It is just a RJ45 keystone jack on one end and TIa-568B plug on the other end.
Sample cable XLR to RJ-45
- Media:Dla-rj45-wiring.pdf Drawing created by Tpctech
Possible Diagram
Sample drawing of the Lynx Wireless system with a LOR controller
