Light-O-Rama Controllers

Helpful links to Use LOR equipment with DLA

• LOR to Lynx Dongle Connections
• DMX-DOC.pdf; Light-O-Rama document showing firmware versions required for DMX operation
• Light-O-Rama Support; Light-O-Rama downloads
• LOR controllers need to be updated to firmware v4.20 or higher to work in a DMX environment.
• The only supported way to update the firmware in the LOR controllers is to use the LOR utility. This requires a valid licensed copy of of the Light-O-Rama sequencing software.
•  ? Question: Is the LOR controller auto terminated?
• Light-O-Rama v2 to Vixen sequence converter.; written by aERonAUtical96 (Rob)
• Using a LOR iDMX adapter to drive Lynx equipment.

Lynx Dongle to LOR 568b and possible D-light cable pinout

Dongle	LOR
WH/OR (1)	Blue (4)
Orange (2)	WH/Blue (5)

thanks to Joneslights for the information.

Sample cable to connect dongle

This is a simple dongle to convert and crossover the blue and orange cable pairs.

It is just a RJ45 keystone jack on one end and TIa-568B plug on the other end.

Sample cable XLR to RJ-45

• Media:Dla-rj45-wiring.pdf Drawing created by Tpctech

Possible Diagram

Sample drawing of the Lynx Wireless system with a LOR controller