Difference between revisions of "RickTest"
From DiyLightAnimation
| Line 59: | Line 59: | ||
|} | |} | ||
| − | 1 - Normally different transformer and resistor | + | 1 - Normally different transformer and resistor are needed. |
2 - Cut traces for the output section - Note Input Voltage has to be either 120v or 240v | 2 - Cut traces for the output section - Note Input Voltage has to be either 120v or 240v | ||
3 - SSR4 can control low voltage lights while connected to the Freestyle. | 3 - SSR4 can control low voltage lights while connected to the Freestyle. | ||
4 - Currently the DMX option on the SSR4 can be used with 240v volts but the firmware doesn't work with 50 hz. | 4 - Currently the DMX option on the SSR4 can be used with 240v volts but the firmware doesn't work with 50 hz. | ||
Should be fixed later this year. | Should be fixed later this year. | ||
Revision as of 13:21, 26 January 2009
Voltage Chart for Lynx Hardware
| Device | 120 volts - | 240 volts - | 12 volts DC - | Low volts (24/36) |
| Lynx | Yes | Yes (1) | No | Yes (2) |
| Lynx Express | Yes | Yes (1) | No | No |
| Freestyle | Yes | Yes (1) | No | No |
| SSR4 | Yes | Yes (1) | No | Yes (3) |
| SSR4-DMX | Yes | Yes (1,4) | No | No |
| Lynx Splitter | Yes | Yes (1) | No | No |
| Lynx MR-16 | No | No | Yes | No |
1 - Normally different transformer and resistor are needed. 2 - Cut traces for the output section - Note Input Voltage has to be either 120v or 240v 3 - SSR4 can control low voltage lights while connected to the Freestyle. 4 - Currently the DMX option on the SSR4 can be used with 240v volts but the firmware doesn't work with 50 hz. Should be fixed later this year.
